Replacement power supply for the ESV1200, ESV1500, and Insta-Line Quantum illuminated cabinets. Power supplies features universal Input of 90-264VAC and continuous short circuit protection. Interchangeable AC Plugs allows for easy adaptation to non US power outlets. Meets EN55022 Class B and CISPR/FCC Class B for EMI.ESV1200 Illuminated Cabinet with LED lights provides uniform illumination across the entire testing surface. Automatically adjusts to incoming power of 100 to 240 VAC. Easily store your charts in handy compartment on back of ESV1200.
Compatible with all 9" x 14" Good-Lite charts but are not provided with this unit and must be ordered separately. 9"W x 14"H x 2"D (22.86 cm x 35.56 cm x 5.08 cm) and weights only 4.2 lbs (1.9 kg). CE and CSA Listed.
Can be powered by an optional battery pack. Power plug adopter may be needed for use outside the U.S.
Measurements- Width: 22.86cm/9" Height: 35.56cm/14" Density: 5.08cm/2"The ESV3000 ETDRS Illuminated Cabinet contains patented internal calibration technology which automatically controls the standardized LEDs (light emitting diodes) output. This device is specifically designed for the rigorous lighting standards needed for clinical trials and vision research. When this lighting technology is combined with a universal standard power supply, the result is consistent standardized lighting that makes the ESV3000 the most accurate, easy to use tester evaluating ETDRS and LogMAR acuity during research. Simply turn on the device and with a push of a button, the ESV3000 automatically calibrates to a photopic light level of 85 cd/m2 , or a mesopic level of 3 cd/m2. These light levels are recommended by the Committee from the National Academy of Sciences for Vision Testing Standards and are required by the FDA for ETDRS evaluation in clinical trials. Unlike previous illuminator cabinets which use “out-of-date” fluorescent bulbs, there is no warm up period and no requirement to replace the light source. The old fluorescent light bulbs have to be replaced every 2,000 hours, or once year, and new bulbs have to be “burned in” before use. For the ESV3000, the LEDs last up to 20+ years of normal use, never need replacement and require no burn-in period. Just plug in the ESV and it is ready to test.
For use outside the US, the ESV3000 has a universal power supply that is easily adapted to 100V to 240V, unlike cabinets that use fluorescent bulbs, which require the use of 110V input voltage.
The ESV has a convenient storage cabinet for safe keeping of additional charts when not in use.
The ESV3000 Features
•Standardized ETDRS testing with 3 preset luminance levels at 3, 85 and 160 cd/m2
•Self calibrating technology
•Universal power supply*
•Optional adjustable glare lights available
•Controlled by infrared wireless remote. Chart storage in back. Compatible with all existing high contrast (black) ETDRS charts
•Chart storage in back. Compatible with all existing high contrast (black) ETDRS charts
•NEI and FDA Approved
Dimensions: 24.75" H x 25.625" W x 3.75" D (62.86 cm x 65.09 cm x 9.53 cm). CE and CSA listed.
This kit includes
•ESV3000 ETDRS Viewer
•3 Original Series Charts: Chart R, Chart 1 & Chart 2 for 13 feet/4 meters testing distance
•Floor Stand with casters
* Power plug adaptor may be needed for outlets outside the United States.